mSATA to 2.5" IDE SSD Drive, 7mm

The Lindy mSATA SSD to 2.5" IDE Drive Adapter converts a mSATA SSD into a 7mm high 2.5" IDE 150 Mbit/sec SSD. Increase your system performance by adding the speed benefits of an mSATA SSD to any 2.5 Inch IDE application.

Transparent to the operating system, the adapter doesn’t require any the installation of drivers. It reduces Data transfer bottlenecks and utilise the full potential of your IDE controller, with a potential file transfer speed of up to 150 Mbit/sec.

Additionally, the adapter helps you save money thanks to the reduced power demands of SSD over regular platter drives.

Package contents

• 1 x mSATA SSD to 2.5 Inch IDE Drive Adapter
• 4 x Mounting Screws
• 1 x Quick installation Guide

• 44 pin IDE male connector
• Compliant with serial ATA 2.6
• Jumper setting supports IDE Master, Slave & Cable Select modes
• ATA/ATAPI PIO mode data transfer
• ATA/ATAPI UDMA data transfer rate of 150/133/100/66/44/33/25/16.7 Mbit/sec
• ATA/ATAPI-7 streaming feature set
• 48bits LBA can break disk capacity limit to support mSATA SSD (max. 115, 144, 188GB)
• Tag command queuing (max. 32 entries)