Tap image to zoom

HDBaseT Presentation System with Control Keypad

No. 38288
£1,706.42 inc. VAT (FREE UK Delivery)
10+ in stock now
This product has been added to your basket...
  • Easily creates smart, autonomous presentation or education spaces
  • The system comprises of a control keypad, multi-AV transmitter & HDBaseT receiver
  • 70m HDBaseT connection allows for a simple and flexible installation with PoH
  • Analogue audio extraction supplies immersive audio to external speakers
  • 2 year warranty

The Lindy HDBaseT Presentation System is a powerful presentation system that allows three source devices to be connected to a remote display at up to 70 metres. This device uses three key components that create smart, autonomous presentation, education or collaboration spaces.

An HDBaseT multi-AV transmitter with support for HDMI, VGA with audio and USB inputs which can be surface mounted. An HDBaseT receiver with dual channel analogue audio extraction, microphone input, RS232 and USB control from an interactive board, designed for discreet installation. Finally, a separate wall mounted room control panel is included to quickly switch between input devices, adjust volumes and power on or off the display.

Both the multi-AV transmitter and control panels are both designed using PoH (power over HDBaseT) which provides power to both units alongside data using a standard Cat.6 network cable. This removes complexity from installations by allowing a single power supply to provide power to the entire system.

4K UHD video, multi-channel & digital audio formats including DTS-X & Dolby Atmos can be transmit 40m (131.23ft) over a single HDBaseT connection allowing the receiver can be conveniently placed in a wall or ceiling cavity depending on the locations of other connected devices such as a display, projector, sub-woofers and speakers. Distances up to 70m (229.66ft) are possible with 1080p video signals.

The inclusion of a relay port on the receiver allows room automation with devices such as a motorised projector screen or lighting to be configured to trigger once video devices are connected or disconnected.

Using reliable HDBaseT technology, single cable installation and PoH means this system is perfectly suited for education in a classroom or training room environment. Control over this system is managed through not only the wall plate, but also from a web GUI which is freely available on any device occupying the same network, including mobile devices. This can be used to switch or set a video input, display device connection status’, determine when the relay device is used and much more. 

HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

Please note: The Transmitter Wall Plate requires a double gang US Style backbox and the Control Wall Plate requires a single gang US style backbox, both with hole spacing of 8.33cm (3.281")


  • AV Interface: HDMI
  • Interface Standard:HDMI 2.0
  • Supported Bandwidth: 10.2Gbps
  • Maximum Distance:
    • 70m (229.66ft) - 1920x1080@60Hz
      40m (131.23ft) - 3840x2160@30Hz
  • Maximum Resolution: 3840x2160@30Hz 4:4:4 8bit
  • HDCP Support: Pass-through
  • EDID Pass Through: Pass-through
  • Supported Audio: Pass-through
  • Separate Audio Ports: -
  • IR Support: -
  • CEC Support: Pass-Through
  • Serial Interface: -
  • Transmission Protocol: HDBaseT
  • Transmission Medium: 1 x Cat.5e/6
  • Laser Class (only for Fibre): -
  • Wavelength (only for Fibre): -
  • Chipset: VS210
  • Special Features: -


  • Transmitter Input: 2x HDMI (Female), 1x VGA (Female), 1x USB Type B (Female), 1x 3.5mm Audio (Female)
  • Transmitter Output: 1x RJ45 (Female)
  • Receiver Input: 1x RJ45 (Female), 1x RS-232 (Terminal Block), 1x Mic In (Terminal Block)
  • Receiver Output: 1x HDMI (Female), 1x USB Type A (Female), 1 Relay (Terminal Block), 1x Audio out (Terminal Block), 1x Amplifier output (Terminal Block)
  • Bi-directional Ports: -
  • Power: 5.5/2.1mm DC socket

Physical Properties

  • Dimensions (approx.) WxDxH:
    • Transmitter: 115.9mm x 114.3mm x 38.7mm
      Receiver: 250mm x 104mm x 30mm
      Control Plate: 70mm x 32mm x 115mm
  • Housing Material: Metal
  • Net Weight: 1.227kg (2.71lb)
  • Operating Temperature: 0°C - 40°C (32°F - 104°F)
  • Storage Temperature: -20°C - 60°C (-4°F - 140°F)
  • Humidity: 20-90% RH (non-condensing)
  • Power Requirements: 24VDC 3.75A
  • Colour: Transmitter: White, Receiver: Black, Control Plate: White


  • Packaging Type: Carton box
  • Packaging Dimensions: 300x275x110mm (11.81x10.83x4.33in)
  • Gross Weight: 2.143kg (4.72lb)
  • Warranty (Years): 2
  • Certified: CE, UKCA, FCC, RoHS & REACH

Package Contents

  • 1 x HDBaseT Transmitter Wall Plate
  • 1x HDBaseT Receiver
  • 1x Wall Plate Control Panel
  • 1x 24VDC 3.75A Power Supply: Barrel Size: 5.5/2.1mm
  • 4x 3-Pin Terminal Block
  • 1x 4-Pin Amplifier Terminal Block
  • 1x Lindy QIG

Purchasing Information

  • No. 38288
  • EAN: 4002888382885
Be the first to review HDBaseT Presentation System with Control Keypad. Write a review ›


- £3.99 Royal Mail 1st Class
- £7.99 Next Working Day
- FREE Next Working Day on orders over £150.00

Delivery charges shown are based on standard UK mainland orders. Other options are available. More Information

Delivery Information

  • FREE Next Working Day* delivery on all orders over £150.00
  • Orders under £75.00 weighing less than 1kg are shipped using Royal Mail 1st Class delivery @ £3.99
  • Royal Mail 1st Class delivery is a non-trackable, non-recorded service
  • Orders under £75.00 that weigh over 1kg are shipped using our Next Working Day* courier service @ £7.99
  • Courier delivery is trackable
  • Saturday delivery and timed deliveries are also available - just make your choice at checkout
  • On a working day, all orders received before 5.00pm for Royal Mail, or 4.30pm for our courier service, are dispatched the same day (subject to stock availability)
  • Orders received after the above mentioned times, or on a weekend or public holiday, will be dispatched from our warehouse the following working day.
  • Orders received after 5.00pm or on a weekend or public holiday will be dispatched from our warehouse the following working day

* Next Working Day applies to UK mainland addresses only and excludes Saturday, Sunday and Bank Holidays.

For more information about our Delivery options, please click here

Returns Information

We're confident that you'll be totally happy with any goods purchased from Lindy. However, if you have changed your mind about an item, and you are a private consumer (i.e. not a business customer), then you can return it to us for a full refund provided that:

  • You notify us within 30 calendar days from the day after you've received the goods
  • The item(s) are returned within 30 days of cancellation. The 30 days start the day after you have notified us of the cancellation
  • The item(s) are returned undamaged and unused, with its original packaging and complete with all manuals, components and software seals (if applicable) intact

If you are a business customer please note that the above points do not apply to B2B purchases and you should therefore read Section 5 of our Terms & Conditions

In accordance with The Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 we would like to make you aware of the following important information:

  • We will refund within 14 days of receipt of goods (i.e. when we receive the returned items) or of evidence that the item(s) have been returned to us
  • We will refund all monies received, including outbound delivery cost, however if you chose a more expensive means than the cheapest, default standard delivery option offered we will only refund the default standard delivery option you could have chosen
  • We will not refund the cost of the return delivery to us
  • We have the right to deduct monies from refunds where goods show signs of unreasonable use leading to diminished value. We will not deduct for removal of packaging to inspect the item, but we may deduct for wear and tear where the item has not been checked but used. The charge for this is £5.00 or 15% of the product cost (whichever is greater)

Damaged in transit
If you receive goods which have been damaged in transit, please:

  • Sign the delivery note stating the goods have arrived damaged
  • Report it to us within 24 hours of receipt

Faulty or incomplete on arrival
You can return goods that have arrived faulty or incomplete for a full refund or replacement, provided that:

  • For faulty items you notify us within 7 working days from the day after you've received the goods
  • If the goods are incomplete or there is a shortfall you notify us within 3 days of receiving the goods
  • The item you return is complete with all supplied manuals, components and software

If, after testing by our Technical Dept., the product is proven to be faulty we will refund your reasonable return carriage costs.

Faulty within warranty
If a product develops a fault within its warranty period you are entitled to a repair, refund or replacement at our discretion.

Goods returned as faulty where no fault is found will be returned to the customer.

How to return goods to us
The quickest and easiest way to return goods is to complete our on-line Returns Merchandise Form.

Or you can contact our Technical Department on:

Tel: 01642 754040
Fax: 01642 754049
Email: technical@lindy.co.uk

Alternatively, you can download, complete and fax the Model Cancellation Form

We recommend you return any goods via a postal/carriage service that requires a signature upon delivery.

Please note: The above information applies to orders placed on the end user section of our website. For registered trade and business customers ordering from the trade or business sections of the site, different delivery charges and returns terms apply.