Tap image to zoom

HDMI, USB, RS232 & IR over Gigabit IP Transmitter

No. 38066
£22.02 inc. VAT (Delivery from £3.99 inc. VAT)
10+ in stock now
This product has been added to your basket...
  • Simple plug and play installation, no drivers or software required
  • Extends HDMI and DVI-D signals via 1000Base-T Gigabit Ethernet or a single Cat 6 cable (up to 100m)
  • Supports Full HD 1080p via HDMI and DVI-D Single Link up to 1920 x 1080
  • Designed for smooth video playback as well as high resolution computer graphics
  • Extends RS232, IR and USB* signals
  • IR Frequency range 35-45kHz
  • Supports only 115200b/s fixed data rate (fixed) and Null Modem cable is required
  • Can be used to Extend (1 x transmitter to 1 x receiver) or Broadcast (1 x transmitter to multiple receivers)

The HDMI over Gigabit Ethernet Extender System is capable of broadcasting 1080p Full HD over a standard gigabit network. It can operate as a standard extender in a single transmitter to single receiver configuration or can be used as a distribution system with a single transmitter to multiple receivers. In addition to extending Full HD 1080p HDMI signals the extender system can also be used to extend USB*, RS232 and IR remote control signals, meaning it can even be used as a KVM extender for remote control of a computer.
This Transmitter must be used with a HDMI over Gigabit Ethernet Receiver, just choose the number of receivers you need for your installation.
*Please Note: Only asynchronous USB devices such as keyboard and mouse are supported, mass storage, pendrives, printers and webcams cannot be supported
Key Features
  • Supports HDMI up to FullHD 1080p, HDCP and DVI-D up to 1920x1080 (1920x1200 is not supported)
  • Uses a non-visually perceptible dynamic compression for network transmission over Gigabit Ethernet
  • Supports network switches and other active components such as Gigabit Ethernet Fiber Optic Transceivers for longer distances
  • May be used with Fast Ethernet 100Base-T, which will require a higher dynamic compression level
  • Multiple transmitters may be used on the same network, however due to bandwidth restrictions some fluidity of video may be lost
  • Dynamic adaptation and development of the network connection and the video link
  • Status LEDs to verify the connection
  • RS232 supports parallel transmission, connection via D-sub 9-pin plug sockets
  • Supports parallel transmission of IR remote control signals, IR sensor on the receiver output for IR transmitter cable (included) at the transmitter
  • Supports parallel transmission of asynchronous USB signals. Only asynchronous USB devices such as keyboard and mouse are supported, mass storage, pendrives, printers and webcams cannot be supported.
  • The audio ports on the receiver (38067) are connected to the transmitter (38066) which connects to a PC as a USB audio device with stereo out and mic in. Digital audio via HDMI is supported but not converted to the analog 3.5mm stereo out ports on the receiver but provided via HDMI only.
  • 2 years warranty

Specifications

  • AV Interface: HDMI
  • Interface Standard: HDMI 1.2
  • Supported Bandwidth: 4.95 Gbps
  • Maximum Distance: 100m (328.08ft)
  • Maximum Resolution: 1920x1080@60Hz 4:4:4 8bit
  • HDCP Support: Pass-through
  • EDID Pass Through: Pass-through
  • Supported Audio: 2 Channel PCM
  • Separate Audio Ports: 3.5mm
  • IR Support: 33-50kHz
  • CEC Support: -
  • Serial Interface: RS232
  • Transmission Protocol: IP
  • Transmission Medium: 1 x Cat.5e/6
  • Laser Class (only for Fibre): -
  • Wavelength (only for Fibre): -
  • Chipset: ASPEED AST1500
  • Special Features: USB KVM Function

Connectors

  • Transmitter Input: HDMI (Female), 3.5mm (Female)
  • Transmitter Output: RJ45 (Female), IR, 3.5mm (Female)
  • Receiver Input: -
  • Receiver Ouput: -
  • Bidirectonal Ports: USB, RS232
  • Power: 5.5/2.1mm DC socket

Physical Properties

  • Dimensions WxHxD: 180x110x25mm (7.09x4.33x0.98in)
  • Housing Material: Metal
  • Nett Weight: 0.46kg (1.01lb)
  • Operating Temperature: 0°C - 60°C (32°F - 140°F)
  • Storage Temperature: -20°C - 70°C (-4°F - 158°F)
  • Humidity: 20 - 90% RH (non-condensing)
  • Power Requirements: 5VDC 3A
  • Colour: Black

Miscellaneous

  • Packaging Type: Carton Box
  • Packaging Dimensions: 160x220x50mm (6.3x8.66x1.97in)
  • Gross Weight: 0.72kg (1.59lb)
  • Warranty (Years): 2
  • Certified: CE, UKCA, FCC, REACH and RoHS

Package Contents

  • Transmitter unit
  • IR emitter cable
  • Multi-Country Power Supply (EU, UK, US & AUS)
  • Lindy manual 

Purchasing Information

  • No. 38066
  • EAN: 4002888380669
Be the first to review HDMI, USB, RS232 & IR over Gigabit IP Transmitter. Write a review ›

STANDARD DELIVERY OPTIONS

- £3.99 Royal Mail 1st Class
- £7.99 Next Working Day
- FREE Next Working Day on orders over £150.00

Delivery charges shown are based on standard UK mainland orders. Other options are available. More Information

Delivery Information

  • FREE Next Working Day* delivery on all orders over £150.00
  • Orders under £75.00 weighing less than 1kg are shipped using Royal Mail 1st Class delivery @ £3.99
  • Royal Mail 1st Class delivery is a non-trackable, non-recorded service
  • Orders under £75.00 that weigh over 1kg are shipped using our Next Working Day* courier service @ £7.99
  • Courier delivery is trackable
  • Saturday delivery and timed deliveries are also available - just make your choice at checkout
  • On a working day, all orders received before 5.00pm for Royal Mail, or 4.30pm for our courier service, are dispatched the same day (subject to stock availability)
  • Orders received after the above mentioned times, or on a weekend or public holiday, will be dispatched from our warehouse the following working day.
  • Orders received after 5.00pm or on a weekend or public holiday will be dispatched from our warehouse the following working day

* Next Working Day applies to UK mainland addresses only and excludes Saturday, Sunday and Bank Holidays.

For more information about our Delivery options, please click here

Returns Information

We're confident that you'll be totally happy with any goods purchased from Lindy. However, if you have changed your mind about an item, and you are a private consumer (i.e. not a business customer), then you can return it to us for a full refund provided that:

  • You notify us within 30 calendar days from the day after you've received the goods
  • The item(s) are returned within 30 days of cancellation. The 30 days start the day after you have notified us of the cancellation
  • The item(s) are returned undamaged and unused, with its original packaging and complete with all manuals, components and software seals (if applicable) intact

If you are a business customer please note that the above points do not apply to B2B purchases and you should therefore read Section 5 of our Terms & Conditions

In accordance with The Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 we would like to make you aware of the following important information:

  • We will refund within 14 days of receipt of goods (i.e. when we receive the returned items) or of evidence that the item(s) have been returned to us
  • We will refund all monies received, including outbound delivery cost, however if you chose a more expensive means than the cheapest, default standard delivery option offered we will only refund the default standard delivery option you could have chosen
  • We will not refund the cost of the return delivery to us
  • We have the right to deduct monies from refunds where goods show signs of unreasonable use leading to diminished value. We will not deduct for removal of packaging to inspect the item, but we may deduct for wear and tear where the item has not been checked but used. The charge for this is £5.00 or 15% of the product cost (whichever is greater)

Damaged in transit
If you receive goods which have been damaged in transit, please:

  • Sign the delivery note stating the goods have arrived damaged
  • Report it to us within 24 hours of receipt

Faulty or incomplete on arrival
You can return goods that have arrived faulty or incomplete for a full refund or replacement, provided that:

  • For faulty items you notify us within 7 working days from the day after you've received the goods
  • If the goods are incomplete or there is a shortfall you notify us within 3 days of receiving the goods
  • The item you return is complete with all supplied manuals, components and software

If, after testing by our Technical Dept., the product is proven to be faulty we will refund your reasonable return carriage costs.

Faulty within warranty
If a product develops a fault within its warranty period you are entitled to a repair, refund or replacement at our discretion.

Goods returned as faulty where no fault is found will be returned to the customer.

How to return goods to us
The quickest and easiest way to return goods is to complete our on-line Returns Merchandise Form.

Or you can contact our Technical Department on:

Tel: 01642 754040
Fax: 01642 754049
Email: technical@lindy.co.uk

Alternatively, you can download, complete and fax the Model Cancellation Form

We recommend you return any goods via a postal/carriage service that requires a signature upon delivery.

Please note: The above information applies to orders placed on the end user section of our website. For registered trade and business customers ordering from the trade or business sections of the site, different delivery charges and returns terms apply.