Further Information
Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card. The following example shows the maximum values from a test with a Belinea 1280 x 1024 DVI flat panel display and two different graphics cards (ATI Radeon 7000 and NVidea 5200).
As a general rule, the newer the hardware used, the longer the distance and the higher the supported resolution.
| LINDY SLD cable length | Max. resolution using a
2004 Belinea TFT
(1280 x 1024 native resolution) | Max. resolution using a
2006 Dell TFT
(1920 x 1200 native resolution) |
| 20m | 1280 x 1024 @ 60Hz | 1920 x 1200 @ 60Hz |
| 25m | 1024 x 768 @ 60Hz | 1600 x 1200 @ 60Hz |
Features of the RF-BLOK shielded design:
- Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
- Increased insulation resistance up to 25%
- No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
- Tight fit of internal wires as there is no inner mould
- No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
- Smaller overall dimensions which allows more room behind the host or peripheral
- Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one
UK
DE
IT
FR
CH
AT
IE
AU
USA
JP
TW
other
Your
